38
5

Mountthenewlamp.

Align the orientation, press down the new lamp
until the bottom is reached, and lock in place using
the two lamp locking screws.
6

Replacethelampcover.

Align the cover, and press it in, then tighten the
screws loosened in step
3
until the lamp cover
is no longer loose. (Be sure to replace the lamp
cover.)
7

Resetthelamptime.

See the lamp’s manual for instructions on resetting
the lamp time.

Notes and Precautions

•The[Lamptime] item in the Status display menu indicates the time of lamp use (as a
rough guide).
p.35
•Itisrecommendedthatthelampbereplacedafter3,000hoursofuse.When[Lamp
time]reaches 3,000 hours, a message will appear. (After 3,000 hours, the message will
appear when the power is first turned on after each 100 hour period of use.) This display
disappears when you press the button.
•Attachthelampcovercorrectlysothatitisnotloose.Ifitisnotattachedcorrectly,the
projector may fail to be powered on or the lamp may fail to come on.
•Alwaysreplacethelampwithanewone.
•Thelampismadeoutofglass.Donottouchtheglasssurfacewithyourbarehands,
bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

UsedLamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic mer-
cury. Be careful not to break used lamps, and dispose of them in accordance with local
regulations.
2
1
5
Lampreplacement(Continued)