21
Preparations
Placement

PlacementStyles

As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [Projectionmode] in the
Default setting menu
p.34
, in accordance with your needs.

WARNING

• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing
the unit. Attempting to clean or replace the lamp in a high location by yourself may cause you to fall,
resulting in injury.
• Ifyouwishtomounttheprojectorontheceiling,besuretoaskyourdealertodoso. Mounting
the projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge.
Improper mounting could cause the projector to fall, resulting in an accident.
• Iftheprojectorisceiling-mounted,installthebreakerforturningoffthepowerincaseof
anomaly. Let everyone involved with the use of the projector know that fact.
Floor-mountedfrontprojection
Floor-mountedrearprojection
Ceiling-mountedfrontprojection
Ceiling-mountedrearprojection