35
Operations
■ DisplayingInformation(Statusdisplay)
This displays information about the input signal, lamp use time, etc.
“Yes”: displayed, “No”: not displayed
Item Description
Computer Y/PB/PRVideo S-video
Input Input source name Ye s Yes Ye s Yes
Resolution Resolution (in dots)
[Note 1]
Yes No No No
Video mode Color method of video signal No Yes Yes Ye s
Picture mode Picture mode setting Ye s Yes Ye s Yes
Lamp time Time of lamp use
[Note 2]
Yes Yes Ye s Yes
Version Firmware version
[Note 3]
Yes Yes Ye s Yes
Notes
1: The Resolution of supported RGB signals
p.43
is shown.
2: Displays [Lamptime] as a measure of when the lamp should be replaced. (Cannot be used as
a counter of guaranteed lamp time.) When the displayed time approaches 3,000 hours, consult
with a dealer about getting a TLPLV10 replacement lamp (sold separately) prepared.
3: [Version] shows the version of the projector’s internal control program. This firmware version
will be requested for customer service purposes.
Note
•Thedisplayedinformationwillnotberefreshedifthestatuschanges.Torefreshthe
information, dismiss the display, then display it again.