23
Preparations
Connection

Before connection

•Readtheowner’smanualofthedeviceyouareconnectingtotheprojector.
•Somecomputerscannotbeusedwithorconnectedtothisprojector.
Check for an RGB output terminal, supported signal
p.43
, etc.
•Turnoffthepowerofbothdevicesbeforeconnecting.
•Thegurebelowshowssampleconnections.Thisdoesnotmeanthatallofthesedevices
can or must be connected simultaneously.
Notes
•MovingpicturesplayedbackoncomputersusingDVDsoftwaremayappearunnatural
when projected with this projector. However, it is not a malfunction of the projector.
•WhenanAUDIOOUTterminalisconnected,soundisnotoutputfromtheprojector
speaker.
•OutputvolumeofAUDIOOUTterminalcanbeadjustedbytheVOL+/- button.
•TheMONITOROUTterminaloutputsanalogRGBsignalsorcomponentvideosignals
(Y/PB/PR) from the COMPUTER IN terminals.
•AcomputermonitorusuallycannotacceptY/PB/PR signals correctly.
Computer (for control)Monitor
To RS-232C
terminal
Video recorder,
DVD player, etc.
Audio cable (not supplied) Control cable
RGB cable
(supplied)
To RGB output
Computer
To audio input
Audio cable
(not supplied)
Video cable
(not supplied)
To S-video output
To video output
S-Video cable
(not supplied)
p.45
Video recorder,
DVD player, etc.
Audio amplifier, etc.
To audio output