![](/images/new-backgrounds/1129675/12967535x1.webp)
[5] BLC (Back Light Control)
In case the back lighting is too bright to shoot the
14 main object clearly, press 14 BACK LIGHT
button.
To cancel this mode, press the button.
[6] Preset operation
The Camera head direction, the zoom position, the focus status and the brightness level can be
16 registered for as many as six settings.
The registration contents will be retained even if
18the Camera power is turned OFF.
sec). To cancel this, press 16
(1)Setting presets
•Set the Camera head direction, the zoom position, the focus status and the brightness level.
•When 16 PRESET button is pressed, the LED on the Camera blinks in green (for 0.4
PRESET button again.
•Then, press 18 one of the 1 through 6 buttons. Now, the registration is over, and the LED on the Camera goes out. (The preset contents, if already registered, are erased and overwritten.)
(2)Execution of preset
•When 18 one of the 1 through 6 buttons are pressed, the Camera head direction, the zoom position, the focus status and the brightness level are set to that specific preset position.
- 17 -