Elmo PTC-200C Alarm IN/OUT Terminals, Alarm input, Alarm output, Pin arrangement

7.ALARM IN/OUT TERMINALS

[1]Alarm input

By short-circuiting the ALARM 1 IN or ALARM 2 IN Terminal Block to the GND terminal on the Terminal Block, the Camera moves to the allocated preset position.

•When short-circuiting the ALARM 1 IN terminal to the GND terminal, the Camera moves to the preset position 1.

•When short-circuiting the ALARM 2 IN terminal to the GND terminal, the Camera moves to the preset position 2.

Then, when the time set from the OSD menu has passed, the Camera moves back automatically to the lastly executed preset position.

•Regarding time setting, refer to the setting in the OSD menu screen.

[2]Alarm output

When the alarm input signal has been activated and the Camera has moved to the specified position, the alarm signal is outputted at the ALARM OUT terminal for the time preset from the OSD menu.

• Regarding time setting, refer to the setting in the OSD menu screen.

Pin arrangement

Terminal name	Function
1 IN	Inputs the alarm signal <1>.
GND	Grounds.
2 IN	Inputs the alarm signal <2>.
OUT	Outputs the alarm signal.

O

2 GND 1 GND -

OUT OUT

- 22 -