8. ALL CLEAR SWITCH
The PAN-TILT settings, the LENS settings, the preset settings, the ID settings and the Camera settings by means of the OSD can be reset to the factory-settings by turning ON the switch No. 2 of the DIP Switch (4) on the bottom of the Camera before turning ON the power supply to the Camera and then turning OFF the same switch after turning ON the power supply to the Camera.
Note: For all other switches (No. 1, No. 3 and No. 4) of the 4-DIP Switch, be sure to turn them OFF, or operation via the wireless remote controller or by other means will not work.
Switch assignment
| | | | | | | | | | | | |
| Switch No. | | | Normal | | Operation | | Function | |
| 1 | | | OFF | | None | | N/A | |
| 2 | | | OFF | | ON | | | OFF | | ALL CLEAR | |
| | | | |
| | | | |
| | | | |
| | | | | | | | | |
| 3 | | | OFF | | None | | N/A | |
| 4 | | | OFF | | None | | N/A | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
DIP Switch (4)
