Weslo WETL34709.0 user manual Assembly, See the lower drawing. Pull the Latch Knob

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. Make sure that the power cord is unplugged. 1 Turn the Upright Knobs (11) counterclockwise

(only one is shown).

See the lower drawing. Pull the Latch Knob

3, 4

 

(10), partially raise the Uprights (3, 4) and then

11

release the Latch Knob. With the help of a sec-

 

ond person, raise the Uprights.

 

 

Turn the Upright Knobs (11) clockwise to lock

 

 

the Uprights (3, 4) in the vertical position.

 

 

4

 

3

10

6

Image 6
Contents QUESTIONS? Model No. WETL34709.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly See the lower drawing. Pull the Latch KnobAssembly Mended power cord Operation and AdjustmentHOW to Plug in the Power Cord Been tightened before using the power cordConsole Diagram Features of the ConsoleSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleFollow your progress with the display When you are finished exercising, removePower cord. Important If you do not do this On the foot railsHOW to USE a Preset Workout HOW to Change the Incline of the TreadmillHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Problem Solution Lubricating the Walking BeltWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. WETL34709.0 Key No. Qty DescriptionExploded Drawing A-Model No. WETL34709.0 R1209B Exploded Drawing B-Model No. WETL34709.0 Ordering Replacement Parts Recycling Information