Weslo WETL34709.0 user manual Assembly

Page 7

2.Pivot the console assembly to the desired posi- tion and tighten the Console Knobs (37).

Always make sure that the Console Knobs (37) are fully tightened before you use the treadmill.

2

Console

 

Assembly

37

3.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 14 and 15).

7

Image 7
Contents Model No. WETL34709.0 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin See the lower drawing. Pull the Latch Knob AssemblyAssembly Been tightened before using the power cord Operation and AdjustmentHOW to Plug in the Power Cord Mended power cordFeatures of the Console Console DiagramInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeOn the foot rails When you are finished exercising, removePower cord. Important If you do not do this Follow your progress with the displayHOW to Change the Incline of the Treadmill HOW to USE a Preset WorkoutHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Lubricating the Walking Belt Problem SolutionExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. WETL34709.0Exploded Drawing A-Model No. WETL34709.0 R1209B Exploded Drawing B-Model No. WETL34709.0 Recycling Information Ordering Replacement Parts