Weslo WCTL41305.0 user manual HOW to Connect Your Home Stereo, HOW to Connect Your Computer

Page 16

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter.

Plug the adapter into the LINE OUT jack on your stereo.

A

CD

 

 

 

 

VCR

 

 

Amp

LINE OUT

 

LINE OUT

 

Adapter

 

 

Audio

 

 

Cable

 

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter.

Plug the adapter into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the LINE OUT jack on your stereo.

B

CD

 

 

 

 

VCR

 

 

Amp

LINE OUT

 

RCA

Audio

Y-adapter

Cable

Adapter

 

Wire removed from

 

LINE OUT jack

 

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 3.5mm LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the LINE OUT jack on your computer.

A

LINE OUT

Audio

Cable

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into a 3.5mm Y-adapter (available at electronics stores). Plug the Y-adapter into the PHONES jack on your computer. Plug your headphones or speakers into the other side of the Y-adapter.

B

 

 

PHONES

Audio

3.5mm

Cable

Y-adapter

Headphones/Speakers

16

Image 16
Contents QUESTIONS? Model No. WCTL41305.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Back Right SideAssembly Make sure that the power cord is not pluggedCareful not to pinch the wires. Insert two 2 3/4 Bolts Right side. Be careful not to damage the Upright WireDo not overtighten the Wheel Bolt the Wheel must be Able to turn freelyBolts yet Rack Bolts and Nuts before tightening any of themTop View HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeTurn on the fan if desired Measure your heart rate, if desiredWhenkey. you are finished exercising, remove HOW to USE a Speed Program When the program is completed, remove Key from the consoleInsert the key fully into the console Select a speed programHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Adapter Audio CablePressVCR. the Play button on your CD player or Whenkey. the program is completed, removeFollow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Information Mode HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page R0705A Key Qty DescriptionExploded ModelNoExploded DRAWING-Model No. WCTL41305.0 Part 2 R0705A Exploded DRAWING-Model No. WCTL41305.0 Part 3 R0705A HOW to Order Replacement Parts Limited Warranty