Weslo WETL01540 user manual Incline Adjustment, Folding the Treadmill for Storage

Page 7

INCLINE ADJUSTMENT

The incline of the treadmill can be adjusted to any of three angles. To change the incline, first lift the front of the Frame (29) so the small incline knobs on the sides of the Frame slide out of the slots in the brackets on the Uprights (35, 36). Raise or lower the Frame, and slide the knobs into one of the three sets of slots in the brackets. Make sure that the knobs are fully insert- ed at the same height.

35

36

 

Bracket

 

 

29

2.Hold the treadmill securely with your right hand as shown. Insert the Storage Pin (4) into the hole in the right side of the Right Upright (36) and into the Frame (29) as far as it will go.

Next, press the ends of the Spring Clip (21) together, and slide the Spring Clip onto the end of the Storage Pin (4).

2

36

29

21

4

CAUTION: Make sure that the incline knobs are fully inserted at the same height.

FOLDING THE TREADMILL FOR STORAGE

When the treadmill is not in use, it can be folded to the compact storage position. CAUTION: You must be able to safely lift 25 pounds (11 kg) to raise, lower, or move the treadmill. Follow the steps below to fold the treadmill.

1. Hold the tread-

1

mill in the loca-

 

tion shown.

 

CAUTION: To

 

decrease the

 

possibility of

 

injury, bend

 

your legs and

 

keep your back

 

straight. As

 

you raise the

 

treadmill, make

 

sure to lift with

 

your legs

 

rather than your back. Raise the treadmill to the

vertical position.

 

LOWERING THE TREADMILL FOR USE

1.Hold the treadmill securely with your right hand as shown in drawing 2 above. Press the ends of the Spring Clip (21) together, and slide the Spring Clip off the end of the Storage Pin (4). Pull out the Storage Pin and pivot the treadmill down a few inches. Then, reinsert the Storage Pin and reattach the Spring Clip.

2.Hold the treadmill firmly with both hands, and lower the treadmill to the floor. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.

7

Image 7
Contents 8457 089 QUESTIONS?Model No. WETL01540 Serial No Important Precautions Table of ContentsBefore YOU Begin Beneath AssemblyIncluded hex key and wrench View fromPage Lubricating the Walking Platform Treadmill OperationSTEP-BY-STEP Console Operation Folding the Treadmill for Storage Incline AdjustmentLowering the Treadmill for USE Symptom the Walking Belt Slips or is OFF-CENTRE Maintenance and TroubleshootingSymptom the Console does not Function Properly Symptom the Walking Belt does not Move SmoothlyExercise Intensity WHY EXERCISE?HOW to Measure Your Heart Rate Conditioning GuidelinesExercise Frequency Part LIST-Model No. WETL01540Qty Description R1004A Exploded DRAWING-Model No. WETL0154008457 089 Ordering Replacement Parts