Weslo G-25 user manual HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 11

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the treadmill with your hands in the locations shown at the right. CAUTION: To decrease the possibility of in- jury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Raise the treadmill until the latch pin is aligned with the hole in the left handrail. Slide the latch pin into the hole. Make sure that the latch pin is inserted as far as possible into the hole. Lock the latch pin by pressing the end of the pin into the slot in the storage latch as shown in the inset drawing.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the latch pin is fully inserted into the hole in the handrail and locked into place as described above.

1.Hold the handrails and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against one of the wheels, and carefully lower the treadmill until it is in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1

2

Latch

Pin

Hole

Slot

Wheel

1.See drawing 2 above. Hold the upper end of the treadmill with your right hand. Using your left hand, slide the latch pin to the right. Lock the latch pin in place by pressing the end of the pin into the slot in the storage latch.

2.See drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.

CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.

11

Image 11
Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. WLTL19105.1 Serial No Call TOLL-FREEImportant Precautions Table of ContentsTreadmill Operation Left Side Right Side Before YOU BeginTwo Nuts 17. Do not tighten the Handrail Nuts yet AssemblyHold the Right Handrail with the bend in the position ShownTouch the Right Handrail to discharge any static Page PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Insert the key fully into the console Diagram of the ConsoleSTEP-BY-STEP Console Operation Follow your progress with the display HOW to Change the Incline of the TreadmillHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillTop View Maintenance and TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on Workout Guidelines HOW to Measure Your Heart RateConditioning Guidelines Exercise IntensitySuggested Stretches Exercise FrequencyQty Description R1005APart Identification Chart Exploded DRAWING-Model No. WLTL19105.1 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty