ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Do not remove the long plastic tape is inside the Right Handrail until told to. Note: The underside of the treadmill walking belt is coated with
Assembly requires the included allen wrench and your own phillips screwdriver | , | ||
adjustable wrenches | , and 9/16” socket wrench | , wire cutters | . |
Note: To identify small parts used during assembly, see the PART IDENTIFICATION CHART in the center of this manual.
1. Hold the Base |
| 2 |
| |
(71) in the posi- | •Hazardous Voltage |
| ||
|
| |||
tion shown. |
| 7 | ||
Identify the | •Risk of Electric Shock |
|
| |
Right Handrail | •Unplug Treadmill before Assembly |
|
| |
(6), which has a | /Disassembly. |
|
| |
large hole near |
|
|
| |
the lower end. |
|
| 6 | |
Hold the Right Handrail with the bend in the position |
| |||
| Bend | |||
shown. |
|
| ||
|
| Large | ||
|
|
| ||
Using a 9/16” socket wrench and the included allen |
| Hole | ||
71 | 12 | |||
wrench, attach the Right Handrail (6) to the Base (71) with | ||||
two Handrail Bolts (12), two Formed Washers (31), and |
|
| ||
two Nuts (17). Do not tighten the Handrail Nuts yet. |
|
| ||
| 17 |
|
Attach the Left Handrail (7) to the Base (71) in the same | 12 |
|
way. |
|
|
| 31 |
|
2. Position the treadmill near the Handrails (6, 7) as shown. A | 2 |
|
long plastic tape is inside the Right Handrail (6). Secure |
| |
7 |
| |
the end of the plastic tape to the Wire Harness (22) with | 6 | |
the included plastic tie. Pull on the other end of the tape |
| 71 |
to pull the Wire Harness through the Right Handrail and |
|
|
out of the top. |
| 22 |
|
| |
With the help of a second person, raise the Handrails (6, |
|
|
7) so that the Base (71) is resting flat on the floor. |
|
|
|
| Tape |
|
| Tie |
|
| 6 |
|
| 22 |
5