Each time the key is in- serted into the console, the Scan mode will be selected. The SCAN mode indicator will ap- pear in the display, and
a second mode indicator will show which mode is currently displayed. Note: If you have selected a different mode, repeatedly press the Display Mode button to reselect the scan mode.
To select the Speed, Time, Distance, or Calories mode for con- tinuous display, repeat- edly press the Display Mode button. The mode
indicators will show which mode is selected. Make sure that the SCAN mode indicator does not ap- pear.
To reset the display, press the Stop button, remove the key, and then reinsert the key.
The console can display speed and distance in ei- ther miles or kilometers (MPH or Km/H will appear
when the Speed mode is displayed). To change the unit of measurement, remove the key, hold down the Stop button while inserting the key
into the console, and then release the Stop button. An “E” for English miles or an “M” for metric kilome- ters will appear in the display. Press the Speed in- crease button to change the unit of measurement.
Then, remove the key and reinsert it.
5.When you are finished exercising, remove the key from the console.
Step onto the foot rails, press the Stop button, re- move the key from the console, and put it in a secure place.
When you are finished using the treadmill, switch the reset/off circuit breaker to the “off” position and unplug the power cord. IMPORTANT: If you do not do this, the treadmillʼs electrical compo- nents may wear prematurely.
16