Weslo c6 user manual

2.Slide the two Wheel Housings (45) onto the Base (52). Attach each Wheel Housing with two Wheel Housing Bolts (13), two Wheel Housing Washers (32), and two Wheel Housing Nuts (43).

2

45

13

32

43

32

32

45 43

13 32

52

3. Position the Base (52) as close to the front of the	3	3a
treadmill as possible.		98
See drawing 3a. Locate the wire tie in the Right		98	54
Upright (54). Tie the wire tie securely to the con-			Wire Tie
nector on the end of the Wire Harness (98).
Next, pull the opposite end of the wire tie out of
the upper end of the Right Upright (54), until the		54
Wire Harness is routed completely through the		52
Right Upright. Secure the Wire Harness to the
upper end of the Right Upright so that it will not		3b
fall inside.
See drawing 3b. Press the indicated Grommet			54
			49
(49) into the Right Upright (54).
		98
			52

7