6.Set the Console (91) face down on a soft sur- face to avoid scratching it. Hold the Right Handrail (33), which has a large hole in the loca- tion shown, near the Console.
Next, insert the console wire into the hole in the side of the Right Handrail (33). Using needlenose pliers, pull the console wire out of the hole near the bracket on the Right Handrail.
7.Set the Right Handrail (33) on the Console (91).
Make sure that the console wire is not pinched. Start a Crossbar Screw (85) with a Crossbar Star Washer (7) into the Right Handrail, and then start two Console Screws (95) into the Right Handrail. Tighten the
Crossbar Screw and then tighten the two Console Screws; do not overtighten the Screws.
Attach the Left Handrail (not shown) to the Console (91) in the same way. Note: There is not a console wire on the left side.
6 |
|
Console |
|
Wire |
|
Bracket | Large |
| |
| Hole |
33 |
|
91 |
|
7 |
|
85 |
|
7 | 95 |
| |
33 |
|
91 |
|
9