Operations
If you want to...
Do this...
Download Pictures (continued)
Note: See “Troubleshooting,” page 28, for more information about connecting CaptureView to
your PC.
Note: If you are using a Mac OS
9.0or higher, drag the memory card icon to the trash before disconnecting the USB cable.
1.Using the provided USB cable, plug the one end of the cable into the camera's USB port and the other end into your PC's USB port.
2.If using Windows 98SE or lower, drivers must be installed on your PC. See the included
If using Windows 98ME or higher, CaptureView automatically installs on your PC. No drivers are needed.
3.After setup is complete, using Windows Explorer, you can browse the camera's memory as if it were a hard drive.
4.If CaptureView does not appear in Windows Explorer, it might be using a drive letter that has already been assigned by your PC (e.g., C:, D:, E:, etc.). Use Windows' Disk Manager program to change the drive letter to an unassigned letter (e.g., K:).
5You may now copy images or files from the camera's memory to your PC just as you would with any external hard drive or flash memory.
25