11.3.To correct problems by using the individual SPTA set proceed as follows (see Fig. 6).
11.3.1.To replace the fuse link 2 in the protection device: - Unscrew the threaded cover from the housing of the
protection device;
- Remove the defective fuse link;
- Insert the spare fuse link from the SPTA set;
- Screw the cover on the housing of the protection device.
11.3.2.To replace the rechargeable battery 1: - Open the cover of the battery section;
- Remove the used battery;
- Fit the new battery in the section so that the "+" terminal of the battery is connected with the bottom contact of the section;
- Close the cover of the battery section.
11.3.3.To replace the fuse link in the charging device: - Unscrew the outer threaded covers from the fuses; - Unscrew the bayonet of the fuse link holders;
- Remove the fuse links; - Fit in good fuse links; - Close the holder covers;
- Screw on the outer threaded covers.
11.3.4.The individual SPTA set includes the following tools and accessories:
- charging device 11, operated to charge the rechargeable battery
Description
Eraser
Cloth
Charging device Protection device Silica gel Package Package Package Casing
Casing
Cover
Cover
Cover
Operating manual
Designation
G61.93.516 AEP 43.79.608 AEP 43.79.607
AEP 42.86.186 AEP 42.83.368 AEP 42.86.184
G42.62.345 AEP 45.71.018 AEP 42.63.021 AEP 42.63.030 G 42.63.332
Qty | Serial | Remarks |
No. |
1
2
1
1
50g
1
1
1
1
1
1
1
1
1