1. OVERVIEW
RANGEFINDER BINOCULAR LRB 20000 is an advanced Laser Rangefinder system that provides instant distance measurements consistently and accurately. The stereoscopic device provides convenient observation with both eyes. Therefore, the LRB 20000 eliminates a need for two separate devices (binocular and rangefinder) combining both requirements in a single device. It is designated for industrial- technical purposes, ground surveillance, observation of individual targets and measurement. It can be used in geological and engineering survey, repair works, maritime navigation, meteorology and tourism.
The rangefinder completed with the Angular Mount is designed for referencing ground location point by the predetermined landmark coordinates and is capable of:
-measuring horizontal angles and magnetic azimuths:
-measuring vertical angles and angles of elevation;
-determination of target and landmark polar coordinates;
-
The supplied software allows data acquisition on IBM PC compatible computers in DOS/Windows environment. To start communication with computer, do the following:
If you use Windows NT, 2000, XP, or 2003 Server:
-Turn off the computer.
-Insert the disk which is supplied with the LRB 20,0000A into the floppy disk drive.
-Turn computer on and enter the BIOS SETUP in accordance with the computer documentation.
-Set the address of LPT port as 378h, and port type as EPP. In boot menu, choose the first bootable device as Floppy Drive. Register the new settings.
-Proceed with loading, choose “5” or just press “Esc” in options menu. After full loading your computer will work under
-In line a:\> type BDEPP5 and press enter to launch the communication program.
-Perform measurements as described in the manual. The results will be shown in the communicator program window.