Point of Impact Change Chart
Distance | 1 Full Revolution of Adjustment Screw |
| |
25 yds | 12.5 inches |
| |
50 yds | 25 inches |
| |
100 yds | 50 inches |
| |
Distance | 1 Hash Mark of Adjustment Screw |
25 yds | 1.5 inches |
| |
50 yds | 3 inches |
| |
100 yds | 6 inches |
| |
REPLACING THE BATTERY
Your new Bushnell First Strike electronic sight is powered by one 3V “coin-style” lithium battery, Type 2032 (I) (pre-installed). Should your reticle grow dim or not light at all, you will need to replace the battery. To install a new battery, use the provided small hex wrench (M) to loosen the two bolts (G) on the top panel. Remove the top section of the sight and insert the battery “+” side up as shown in the Parts Guide. Replace the top section and tighten the bolts (G).