ZEROING YOUR FIRST STRIKE REFLEX SIGHT
1.With the scope mounted and with the protective lens cover (H) removed, rest the gun on a solid support.
2.Start by sighting along the barrel and aim at a target 25 to 50 yards away. View through your electronic sight and gently rotate the windage (F) and elevation adjustments (E), using the supplied screwdriver (K), to align the red dot with the target as seen along the barrel.
3.You should then fire a test shot to determine the point of impact of your weapon. If you are not hitting your aiming point (the center of the target) make an adjustment by turning the windage or elevation screw(s) in the direction you want the bullet to move. The chart on the next page will aid you in determining the proper amount of adjustment necessary depending upon the range at which you are shooting.
Adjusting the Windage (F)
7