OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
There are two TENSION CORDS(10) and one heavier RED
POWER CORD(11).
The resistance of the CARRIAGE(7) can be adjusted by securing the TENSION CORDS(10, 11) in the slots located on the FRONT FRAME(1). You can achieve various levels of resistance by securing different numbers of the TENSION CORDS(10, 11) in the slots.
NOTE: 1. An extra RED POWER CORD(11) is included for additional resistance. Replace one of the black TENSION CORDS(10) with the RED POWER CORD(11) if additional resistance is desired.
2.To achieve greater resistance in the RED POWER CORD(11) and TENSION CORDS(10), stretch and
ROPE LENGTH ADJUSTMENT
The ROPES(18) are wrapped on the HOOKS located on both sides of the CARRIAGE(7). You can adjust the length between the PULLEY SET(22) and the HAND STRAP(20) by attaching the PLASTIC HOOKS(19) onto different HOOKS.
1.Arm Function: To position the HAND STRAP(20) close to the PULLEY SET(22), hook the PLASTIC HOOK(19) onto the HOOKS which will shorten the ROPE(18).
2.Leg Function: To achieve a full range of movement, hook the PLASTIC HOOK(19) of the rope onto the desired A, B, or C hook.
SLOTS |
A |
B |
C |
HEAD REST ADJUSTMENT
The HEAD REST(15) on the CARRIAGE(7) can be positioned at an incline by simply pivoting the SUPPORT BRACKET underneath the HEAD REST(15).
SUPPORT |
BRACKET |
10