Stamina Products 270 owner manual Assembly Instructions

Page 8

ASSEMBLY INSTRUCTIONS

STEP 4

Remove the paper covering from the foam tape inside the FRONT COVER(3) and REAR COVER(4). Place the FRONT COVER(3) over the FRONT FRAME(1). Place the REAR COVER(4) over the REAR FRAME(2). Press the covers securely in place.

NOTE: The securing SCREWS(M6x1x35mm)(36) for the PULLEY SET(22) on each side may need to be loosened to allow the REAR COVER(4) to fit securely over the frame. Refer to the inset illustration. When retightening the screws for the PULLEY SETS(22) do not over tighten. The PULLEY SETS(22) should move freely.

STEP 5

Insert the FOAM PAD ASSEMBLIES(17) into the holes located on the CARRIAGE(7).

Image 8

Contents Owners Manual Table of Contents Safety InstructionsCall US First Before YOU Begin AeroPilates PerformerEquipment Warning & Notice Labels Hardware Identification Chart Assembly Instructions StepAssembly Instructions TOP FRAME51 Head Rest Adjustment Operational Instructions Load AdjustmentRope Length Adjustment Maintenance StorageConditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Product Parts Drawing Parts List Part Name QTYPart Name QTYLimited Warranty Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO