Stamina Products RECUMBENT BIKE owner manual Assembly Instructions

Page 8

ASSEMBLY INSTRUCTIONS

NOTE: Be careful not to damage the PULSE SENSOR WIRES(104) while doing assembly Step 8 and Step 9.

STEP 7

Attach the SEAT FRAME(6) onto the SEAT SUPPORT TUBE(5) with NYLOCK NUTS(M8x1.25)(80).

STEP 8

Attach the HANDRAIL(7) onto the SEAT FRAME(6) with CARRIAGE BOLTS(M8x1.25x50mm)(99) and NYLOCK NUTS(M8x1.25)(80). Run the PULSE SENSOR WIRES(104) through the upright of the SEAT FRAME(6) and plug it into the socket on the REAR FRAME(2).

STEP 9

Attach the SEAT(36) to the SEAT FRAME(6) with HEX BOLTS(M8x1.25x15mm)(97). Attach the BACK CUSHION(35) to the SEAT FRAME(6) with HEX BOLTS(M8x1.25x40mm)(96).

8

Image 8

Contents Owners Manual Stamina ProductsTable of Contents Safety InstructionsCall US First Before YOU Begin Body Recumbent Bike Hardware Identification Chart Assembly Instructions StepAllen Wrench Assembly Instructions Assembly Instructions SET UP Instructions Function InspectionOperational Instructions Using the Electronic Meter Preset Values OperationHOW to Install and Replace Batteries Function ButtonsOperational Instructions Adjust the Length of the Rotating HandlebarSeat Adjustment Storage Operational Instructions Load AdjustmentMaintenance Conditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Back Product Parts DrawingFront Parts List DIAGRAM# Part Name QTYScrew, Flat Head M5 x 0.8 x 25mm Warranty Limited WarrantyPage Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO