Stamina Products RECUMBENT BIKE owner manual Assembly Instructions, Step

Page 6

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520or e-mail us at: parts@staminaproducts.com

STEP 1

Attach the FRONT STABILIZER(8) onto the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x85mm) (79) and NYLOCK NUTS(M8x1.25)(80).

STEP 2

Connect the PULSE EXTENSION WIRE(107) to the PULSE CONNECTION WIRE(103). Insert the REAR FRAME(2) into the MAIN FRAME(1) and secure with SOCKET HEAD BOLTS(M8x1.25x50mm)(85).

STEP 3

Attach the REAR STABILIZER(9) onto the REAR FRAME(2) with CARRIAGE BOLTS(M8x1.25x85mm)

(79)and NYLOCK NUTS(M8x1.25)(80). Press the STAND CAPS(47) onto both sides of the REAR

STABILIZER(9).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Owners Manual Stamina ProductsTable of Contents Safety Instructions Call US First Before YOU Begin Body Recumbent BikeHardware Identification Chart Assembly Instructions StepAllen Wrench Assembly Instructions Assembly Instructions SET UP Instructions Function InspectionHOW to Install and Replace Batteries Operational Instructions Using the Electronic MeterPreset Values Operation Function ButtonsAdjust the Length of the Rotating Handlebar Seat AdjustmentOperational Instructions Operational Instructions Load Adjustment MaintenanceStorage Conditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Product Parts Drawing FrontBack Parts List DIAGRAM# Part Name QTYScrew, Flat Head M5 x 0.8 x 25mm Warranty Limited WarrantyPage Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO
Top Page Image Contents