OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(21) clockwise. To decrease the load, turn the TENSION KNOB(21) counterclockwise. There are eight levels for the load adjustment.
NOTE: The load will increase as you pedal faster.
STORAGE
1.To store the TOTAL BODY RECUMBENT BIKE simply keep it in a clean dry place.
2.The TOTAL BODY RECUMBENT BIKE is approximately 49 5/8" long x 23 5/8" wide x 48 5/8" tall. These dimensions will vary. Please measure your TOTAL BODY RECUMBENT BIKE if exact dimensions are needed.
3.To move the TOTAL BODY RECUMBENT BIKE, lift the REAR STABILIZER(9) and use the WHEELS(76) on the FRONT STABILIZER(8).
4.To avoid damage to the electronics, remove the batteries before storing the TOTAL BODY RECUMBENT BIKE for one year or more.
MAINTENANCE
The safety and integrity designed into the TOTAL BODY RECUMBENT BIKE can only be maintained when the TOTAL BODY RECUMBENT BIKE is regularly examined for damage and wear. Special attention should be given to the following:
1.Adjust the TENSION KNOB(21) and verify that the Magnetic System provides tension. The Magnetic System should provide many years of use.
2.Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the left pedal has left hand threads and is tightened by turning counterclockwise.
3.Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
4.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5.Worn or damaged components shall be replaced immediately or the TOTAL BODY RECUMBENT BIKE removed from service until repair is made.
6.Only Stamina Products supplied components shall be used to maintain/repair the TOTAL BODY
RECUMBENT BIKE.
7.Keep your TOTAL BODY RECUMBENT BIKE clean by wiping with an absorbent cloth after use.
13