Stamina Products 15-9200 owner manual Assembly Instructions

Page 8

ASSEMBLY INSTRUCTIONS

STEP 3

NOTE: The RIGHT PEDAL(17) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(17) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(16) has L stamped on the end of the pedal shaft. The LEFT PEDAL(16) has left hand threads and is tightened by turning counterclockwise.

Thread the RIGHT PEDAL(17) into the RIGHT CRANK(13) as shown. Tighten the pedal securely. Do the same to attach the LEFT PEDAL(16) to the LEFT CRANK(12).

STEP 4

Pull the ADJUSTMENT KNOB(48), then insert the SEAT POST(5) into the MAIN FRAME(1) and secure with the ADJUSTMENT KNOB(48).

NOTE: The pin of the ADJUSTMENT KNOB(48) should be inserted into one of the adjustment holes in the SEAT POST(5). And the ADJUSTMENT KNOB(48) should be screwed in tight to make the SEAT POST(5) fits securely in the MAIN FRAME(1).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Owners Manual Stamina ProductsSafety Instructions Table of ContentsCall US First Before YOU Begin Equipment Warning & Notice Labels Hardware Identification Chart Assembly Instructions StepAssembly Instructions Place the Water BOTTLE72 in the Water Bottle HOLDER71 SET UP Instructions Function InspectionLoad Adjustment Seat Height AdjustmentOperational Instructions FORWARD/AFT Position of SeatHandlebar Height Adjustment Pedal Strap AdjustmentAdding a Fitness Monitor or Meter MaintenanceStorage Conditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Back Product Parts DrawingFront Parts List Part NameWater Bottle Holder Limited Warranty WarrantyPage Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO
Top Page Image Contents