Operation and Adjustment, Changing the Incline

OPERATION AND ADJUSTMENT

PLUGGING IN THE POWER CORD

This product must be grounded. If it should malfunction or break down, grounding provides a path

of least resistance for electric current to reduce the risk of electric shock. This product is equipped with

a cord having an equipment-groundingconductor and a grounding plug. Plug the power cord Into an

appropriate outlet that Is properly Installed and grounded In accordance with all local codes and ordinances.

DANG E R: Improper connection of the equipment-groundingconductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product--if it will not fit the out- let, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Drawing 1. A temporary adapter that looks like the adapter illustrated in Drawing 2 may be used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (Drawing 1) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle

outlet box covers are not grounded. Contact a qualified electrician to determine If the outlet box cover Is grounded before using an adapter.

Grounded Outlet Box 2

Grounding Plug

Grounding Pin

Grounded Outlet

Grounded Outlet Box

Grounding Pin

Plug

MAINTENANCE-FREE WALKING PLATFORM

This treadmill features a walking platform coated with a special hydrocarbon slip agent. Do not apply silicone spray or any other substance to the walking platform or the walking belt. Such sub- stances will deteriorate the surface of the walking platform and cause excessive wear. The first time you use the treadmill, walk on the entire surface of the walking belt for 10 minutes to break in the walk- ing platform. During this initial break-in period, it is normal for the walking belt to slow.

CHANGING THE INCLINE

To vary the intensity of your exercise, the incline of the tread- mill can be changed using the foot incline knobs on the right

foot rail. To increase the incline, stand towards the back of

the treadmill. Using your right foot, press down on the back foot incline knob until the desired incline is reached. To

decrease the incline, stand towards the front of the tread- mill and press down on the front foot incline knob.

Increase

Inc_

Sears 831.29725 Operation and Adjustment, Plugging in the Power Cord, Changing the Incline