Setting and Using WAKE SET continued
The Wake Cycle will begin at 6:15 am (because of
Setting the Alarm (WAKE)
1.Press the MENU button.
2.The Main Menu is displayed.
3.Use the Rotary Selector Control to highlight WAKE SET.
4.Press the Selector Button to choose WAKE SET. The WAKE SETTINGS menu is displayed. The TIME: item is highlighted.
5.Press the Selector Button to choose WAKE TIME. The WAKE TIME
6.Press the Selector Button. The hour and AM (or PM) are highlighted.
7.Use the Rotary Selector Control to choose both the alarm hour and AM or PM. Notice that the display changes from AM to PM as you pass from 11 to 12 or 12 to 11 (as you turn the control right or left).
8.Press the Selector Button to set the alarm hour. Minutes are highlighted.
9.Use the Rotary Selector Control to choose the alarm minute.
10.Press the Selector Button to set the alarm minute. The Alarm Time is set and the menu returns to WEEKDAY.
Use the same method to set a WEEKEND alarm.
NOTE: You have now set the alarm time(s), but you have not turned the alarm on. To turn on the alarm, push the WAKE button. WAKE will show in the bottom left of the display. To turn the alarm off, press the WAKE button a second time. WAKE will no longer appear in the bottom left of the display.
Setting WAKE Options
In addition to alarm time, in the WAKE SETTINGS menu you can set:
• | Duration | • | Sound |
• | Light | • | Play |
•Volume
Duration is the length of time before the alarm time. During the duration, the light (if chosen) increases in brightness and the sound (if chosen) increases in volume.
13
VA04_Man_Rev9.indd 13
Job#: 0.0??? | Title: VA04 Manual |
Date: 11/04/09 | Version: |
11/4/09 1:38 PM