Verilux VA04 manual Listening to AUX Devices, To Connect an Audio Device to AUX

Listening to AUX Devices

When using an iPod®, cassette tape player or other audio device, you can enhance your listening experience by playing the device through your Rise & Shine® using the AUX IN jack on the rear panel.

Connecting an audio device requires one of the following cables:

•Male-to-male 3.5 mm (1/8”) stereo cable (this would be used, for example, to connect an iPod to the Rise & Shine AUX IN).

•Dual RCA male to 3.5 mm (1/8”) male stereo cable (to connect, for example, the left and right stereo outputs of an external device to the Rise & Shine AUX IN).

To Connect an Audio Device to AUX IN

1.Connect one end of the stereo cable to the output of the audio device.

2.Connect the other end of the cable to the AUX IN jack on the rear panel.

3.Turn the Audio Input Selector to AUX.

4.Use the Volume Control to adjust volume.

NOTE: If the volume level is not high enough using the Rise & Shine Volume Control, increase the volume level of the connected audio device.

24

VA04_Man_Rev9.indd 24 11/4/09 1:38 PM