MAINTENANCE
CLEANING
Perform the following cleaning procedures before use.
Pump: Wipe the pump with a clean, damp cloth and mild detergent, and keep it away from dust. Air dry.
sNOTICE: Do not use phenolic products or corrosive or powdered cleansers to clean the pump.
sNOTICE: Do not immerse or soak the pump.
Mattress: Wipe the mattress unit with a clean, damp cloth and mild detergent. The mattress may also be cleaned using a 10% solution of sodium hypochlorite (bleach) diluted in water. Air dry all parts thoroughly before use.
sNOTICE: Do not use phenolic products to clean the mattress.
sNOTICE: After cleaning, air dry the mattress without direct exposure to sunlight.
GENERAL MAINTENANCE
1.Check main power cord and plug for abrasion or excessive wear.
2.Check mattress cover for signs of wear or damage. Ensure mattress cover and tubes are connected correctly.
3.Check airflow from the air hose connector. The airflow should alternate between each connector every half- cycle time if it’s in alternating mode.
4.Check the air hoses for any kink or break. For replacement, please contact your GF equipment provider.
16 |
|