SECTION 4—PACKAGING, HANDLING AND SET-UP
Adjusting the Bed
Adjusting Length
NOTE: For this procedure, refer to FIGURE 4.2.
DETAIL “A” - LENGTH EXTENDER
1. | Pull down on the release knob located |
| under the head section of the bed. See |
| Detail “A” of FIGURE 4.2. |
2. | Pull the length extender out six inches. |
3. | Release the knob and push the extender |
| in until the knob locks into place. |
Release
Knob
Length
Extender
NOTE: An audible click will be heard.
4.If necessary, repeat STEPS 1 to 3 for the foot section. See Detail “B” of FIGURE 4.2.
Adjusting Width
NOTE: For this procedure, refer to
FIGURE 4.3.
1.Pull down on the release knob located under the side of the bed. See Detail “A” of FIGURE 4.3.
2.Slide the width extender to one of the three the desired widths.
3.Release the knob and push on the extender until the knob locks into place.
NOTE: An audible click will be heard.
4.Repeat STEPS 1 to 3 for the other four side sections on that side. See Detail “B” of FIGURE 4.2.
5.Repeat STPES 1 to 4 for the other side of the bed.
DETAIL “B” - HEAD AND FOOT SECTIONS
Head Section | Foot Section |
FIGURE 4.2 Adjusting the Bed
DETAIL “A” - WIDTH EXTENDER
Width
Extender
Release
Knob
DETAIL “B” - SIDE SECTIONS
Side Sections
FIGURE 4.3 Adjusting Width
Part No 1143215 | 25 | BAR750 |