ViewSonic PJ758/PJ759/PJ760 manual Image Menu, Phase, Size, Auto Adjust

IMAGE Menu

IMAGE Menu (continued)

Item	Description
	Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker.
H PHASE	Right Ù Left
	• This item can be selected only for a computer signal or component
	video signal.
	Using the ▲/▼ buttons adjusts the horizontal size.
	Large Ù Small
H SIZE	• This item can be selected only for a computer signal.
	• When this adjustment is excessive, the picture may not be
	displayed correctly. In such a case, please reset the adjustment by
	pressing the RESET button during this operation.
	Executing this item performs the automatic adjustment feature.
	For a computer signal
	The vertical position, the horizontal position and the horizontal
	phase ( 43) will be automatically adjusted. And the horizontal size
	will be automatically set to the default.
	Make sure that the application window is set to its maximum size
	prior to attempting to use this feature. A dark picture may still be
	incorrectly adjusted. Use a bright picture when adjusting.
	For a video signal, s-video signal or component video signal
	The video format best suited for the respective input signal will be
AUTO ADJUST	selected automatically.
	This function is available only when the AUTO mode is selected to
EXECUTE	VIDEO FORMAT item in INPUT menu ( 32).
	The vertical position and horizontal position will be automatically set
	to the the default.
	For a component video signal, also the horizontal phase will be
	automatically set to the default.
	• The automatic adjustment operation requires several seconds.
	Also please note that it may not function correctly with some input.
	When this function is performed for a video signal, a certain extra
	such as a line may appear outside a picture.
	• The items adjusted by this function may vary when FINE or
	DISABLE is selected for AUTO ADJUST item of SERVICE item in
	OPTION menu ( 43).

ViewSonic 30 PJ758/PJ759/PJ760