Operating
Using the automatic adjustment feature
1. Press AUTO button on the remote control. Pressing this button performs the following.
For a computer signal
The vertical position, the horizontal position and the horizontal phase will be automatically adjusted. And the horizontal size will be automatically set to the default.
Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.
AUTO
VIDEO COMPUTER SEARCH |
| |||
ASPECT |
| AUTO | BLANK | |
MAGNIFY | HOME | PAGE UP | VOLUME | |
ON | ||||
|
|
| ||
OFF | END | PAGE DOWN | MUTE | |
|
|
| ||
FREEZE | MY BUTTON | KEYSTONE | ||
12
POSITIONMENU
For a video signal,
The video format best suited for the respective input signal will be selected
automatically. This function is available only when AUTO is selected for VIDEO FORMAT item in INPUT menu ( 32).
The vertical position and horizontal position will be automatically set to the default. For a component video signal, also the horizontal phase will be automatically set to the default.
●The automatic adjustment operation requires several seconds. Also please note that it may not function correctly with some input. When this function is performed for a video signal, a certain extra such as a line may appear outside a picture.
●The items adjusted by this function may vary when FINE or DISABLE is
selected for AUTO ADJUST item of SERVICE item in OPTION menu ( 43).
Adjusting the position
1. Press POSITION button on the remote control when no menu is indicated.
The “POSITION” indication will appear on the screen.
2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on
the remote control during the operation.
To complete this operation, press POSITION button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.
FREEZE | MY BUTTON | KEYSTONE |
12
POSITIONMENU
ENTER
ESCRESET
POSITION
●When this function is performed on a video signal,
●When this function is performed on a video signal,
●If POSITION button is pressed when a menu is indicated on screen, the displayed picture does not move its position but the menu does.
ViewSonic | 19 | PJ758/PJ759/PJ760 |
