SCREEN Menu
SCREEN Menu (continued)
Item | Description |
|
|
| Using the ▲/▼ buttons turns on/off the message function. |
| TURN ON Ù TURN OFF |
| When the TURN ON is selected, the following message function works. |
| “AUTO IN PROGRESS” while automatically adjusting |
| “NO INPUT IS DETECTED” |
| “SYNC IS OUT OF RANGE” |
| “Searching…” while searching for the input |
MESSAGE | “Detecting…” while an input signal is detected |
| The indication of the input signal displayed by changing |
| The indication of the aspect ratio displayed by changing |
| The indication of the PICTURE MODE displayed by changing |
| The indication of the MY MEMORY displayed by changing |
| The indication of “FREEZE” and “II” while freezing the screen by |
| pressing FREEZE button. |
| • When TURN OFF is selected, please remember if the picture is |
| freezing. Do not mistake freezing for a malfunction ( 21). |
| Each input port for this projector can have a name applied to it. |
| (1) Use the ▲/▼ buttons on the SCREEN menu to |
| select SOURCE NAME and press the ► button. |
| The SOURCE NAME menu will be displayed. |
| (2) Use the ▲/▼ buttons on the SOURCE |
| NAME menu to select the port to be named |
| and press the ► button. Right side of the |
| menu is blank until a name is specified. |
| The SOURCE NAME dialog will be displayed. |
| (3) The current name will be displayed on the |
| first line. Use the ▲/▼/◄/► buttons and the |
| ENTER or INPUT button to select and enter |
SOURCE NAME | characters. The RESET button can be used to |
erase 1 character at a time. The name can be a | |
| maximum of 16 characters. |
| (4) To change an already inserted character, press |
| the ▲ button while the cursor is on the |
| row to move the cursor to the name displayed on |
| the first line and use the ◄/► buttons to select |
| character to be changed. Once a character in the |
| name is selected use the ▼ button to move the |
| cursor back down to the character entry area to |
| select and enter characters as described above. |
| (5) Select and press ENTER or INPUT |
| buttons when finished entering text. |
| To revert to the previous name without saving changes press the |
| ESC or ◄ button and the INPUT button simultaneously. |
ViewSonic | 39 | PJ758/PJ759/PJ760 |
