OPTION Menu
OPTION Menu
From the OPTION menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.
Item
Description
| Using the ▲/▼ buttons turns on/off the automatic signal search function. |
| TURN ON Ù TURN OFF |
| When the TURN ON is selected, detecting no signal automatically |
| cycles through input ports in the following order. The search is |
AUTO SEARCH | started from the current port. Then when an input is found, the |
| projector will stop searching and display the image. |
| COMPUTER IN1 Ö COMPUTER IN2 |
| VIDEO Õ |
|
|
| Using the ▲/▼ buttons turns on/off the automatic keystone function. |
| TURN ON Ù TURN OFF |
| TURN ON : Automatic keystone distortion correction will be | |
| executed whenever changing the slant of the projector. | |
AUTO | TURN OFF : This function is disabled. Please execute the AUTO | |
KEYSTONE | KEYSTONE EXECUTE in the SETUP Menu for automatic | |
keystone distortion correction. | ||
|
•When the projector is suspended from the ceiling this feature will not function properly so select the TURN OFF.
•This function will be unavailable when the Transition Detector is on ( 49).
| Using the ▲/▼ buttons turns on/off the AUTO ON function. |
| TURN ON Ù TURN OFF |
| When set to the TURN ON, the lamp in projector will be |
| automatically turned on without the usual procedure ( 15), only |
AUTO ON | when the projector is supplied with the power after the power was |
cut while the lamp was on. | |
| • This function does not work as long as the power has been |
| supplied to the projector while the lamp is off. |
| • After turning the lamp on by the AUTO ON function, if neither input |
| nor operation is detected for about 30 minutes, the projector is |
| turned off, even though the AUTO OFF function ( 41) is disabled. |
(continued on next page)
ViewSonic | 40 | PJ758/PJ759/PJ760 |
