Pioneer DEH-5000UB Initial Settings, Adjusting initial settings, Turning the off clock

Section
04		Initial Settings
	Adjusting initial settings		3 Press MULTI-CONTROL to select the seg-
	1 Press OFF and hold until the unit turns		ment of the clock display you wish to set.
			Each time you press MULTI-CONTROL, one
	off.
			segment of the clock display is selected.
	2 Press the appropriate button for your		Hour—Minute
			As you select segments of the clock display,
	unit.
			the selected segment blinks.
	DEH-5000UB
	Press SRC and hold until FM STEP appears in		4 Turn MULTI-CONTROL to put a clock
	the display.
			right.
	DEH-4000UB
			# You can also perform the same operations by
	Press MULTI-CONTROL and hold until
			pushing MULTI-CONTROL up or down.
	CLOCK SET appears in the display.
	3 Turn MULTI-CONTROL to select one of		Turning the off clock
	the initial settings.
	DEH-5000UB		display on or off
	FM STEP (FM tuning step)—AUTO PI (auto PI		This function is available only for DEH-4000UB.
	seek)—AUX (auxiliary input)—SW CONTROL
			If the off clock display is turned on, the clock
	(rear output and subwoofer controller)—
			appears on the display when the sources are
	EVER SCROLL (ever scroll)—TITLE SETTING
			off.
	(multi language)—POWER SAVE (power sav-
	ing)—CUSTOM COLOR (illumination color ad-		1 Use MULTI-CONTROL to select
	justing)
			OFF CLOCK.
	DEH-4000UB
	CLOCK SET (clock)—OFF CLOCK (off clock)—		2 Press MULTI-CONTROL to turn the off
	FM STEP (FM tuning step)—AUTO PI (auto PI		clock display on.
	seek)—AUX (auxiliary input)—SW CONTROL		# To turn the off clock display off, press
	(rear output and subwoofer controller)—		MULTI-CONTROL again.
	EVER SCROLL (ever scroll)—TITLE SETTING
	(multi language)

#You can also perform the same operations by pushing MULTI-CONTROL up or down.

#To cancel initial settings, press BAND/ESC.

Setting the clock

This function is available only for DEH-4000UB. Use these instructions to set the clock.

1Use MULTI-CONTROL to select

CLOCK SET.

2Press MULTI-CONTROL to display the

setting mode.

# Press BACK to return to the previous display.

Setting the FM tuning step

The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz.

!If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again.

1Use MULTI-CONTROL to select FM STEP.

2Press MULTI-CONTROL to display the setting mode.

24 En