Operating this unit
Tuner | # You can also store the frequency in memory |
| by pushing and holding |
Basic Operations
Section
02
English
%Select a band
Press BAND/ESC.
# Band can be selected from among FM1, FM2, FM3 or MW/LW.
%Manual tuning (step by step)
Push
%Seek tuning
Push and hold
#You can cancel seek tuning by pushing
#If you push and hold
Notes
!This unit’s AF (alternative frequencies search) function can be turned on and off. AF should be off for normal tuning operation (refer to the next page).
!RDS service may not be provided by all sta- tions.
!RDS functions such as AF and TA are only ac- tive when your radio is tuned to an RDS sta- tion.
Storing and recalling broadcast frequencies
You can easily store up to six broadcast fre- quencies for later recall.
!Six stations for each band can be stored in memory.
1 Press LIST.
Preset screen is displayed.
2Use
Turn to change the preset number. Press and hold to store.
3Use
Turn to change the station. Press to select.
# You can also change the station by pushing
# To return to the ordinary display, press
BAND/ESC or LIST.
# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.
Receiving PTY alarm broadcasts
When the emergency PTY code broadcasts, the unit receives it automatically (ALARM ap- pears). When the broadcasting ends, the sys- tem returns to the previous source.
!An emergency announcement can be can- celed by pressing TA.
Introduction of advanced operations
1Press
2Use
FUNCTION.
Turn to change the menu option. Press to se- lect.
3Turn
BSM (best stations
PTY SEARCH (program type selection)— TRAFFIC (traffic announcement
Notes
!To return to the previous display, press BACK.
!To return to the main menu, press and hold BACK.
En 11