167.35 R TREADMILL
ASSEMBLY
STEP 3: Attach Handle Bars |
|
| |
Note: Left Handle Bar has 2 connector wires |
|
| |
1. | Before attaching right handle bar; connect OTC wire (220) (black |
|
|
| connector), then fasten handle bar on the console with 2x M8 x 15mm | 306 | X4 |
| Allen Head Bolts (306) and 2 M8 flat washers (313). | ||
2. | Before attaching left handle bar; connect OTC (220) wire (black |
|
|
| connector), then fasten handle bar on the console with 2 x M8 x 15mm | 313 | X4 |
| Allen Head Bolts (306) and 2 M8 flat washers (313).. | ||
3. | Note: Secure Allen Head Bolts closest to rear of treadmill first ensuring |
|
|
| a snug fit between handle bar and console prior to tightening. |
|
|
4. | FOLD TREADMILL AND TIGHTEN ALL ALLEN HEAD BOLTS (306) |
|
|
| FROM PREVIOUS STEPS |
|
|
!!!Caution Pinch
point! Do not pinch
wires between
frame!!!
Green plastic wrap
Clear plastic wrap