www.smoothfitness.com 15
ASSEMBLY
STEP 2: Attach Console to left and right console support tubes |
|
|
(1) Connect the two Wires (one 7 Pin and one 5 pin) - Upper (222) (from | 306 | X8 |
console) to the same wires – Lower (144) (from right console support tube) |
|
|
(2) Place the console over the left and right console support tubes and | 313 | X8 |
secure with eight M8 x 15mm Allen Head Bolts (306) and eight M8 Flat |
|
|
Washers (313) (4 on each side). HAND TIGHTEN ONLY. |
|
|
|
|
|
Caution Pinch point! Do not pinch wires between frame.
Bolts should be hand tight only