Hobart CG55 ML-CG55240S001 Installation, Operation and Care of, Unpacking, Assembly, Location

Installation, Operation and Care of

CG SERIES ELECTRIC COUNTER GRIDDLES

SAVE THESE INSTRUCTIONS FOR FUTURE USE

GENERAL

Table 1 shows key general and dimensional data of all models. Consult floor plans on pages 8-10 for positioning and related information. See pages 11-13 for wiring diagrams.

Hobart CG Series Electric Counter Griddles are heavy duty griddles capable of handling any griddling operation with ease. Included are large grease drawers which pull out from the front.

INSTALLATION

Before installing the griddle, verify that the electrical supply agrees with the specifications on the griddle data plate which is located on the top right side of the griddle body.

UNPACKING

Immediately after unpacking the griddle, check for possible shipping damage. If the griddle is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

ASSEMBLY

Place the griddle on its back. Attach the four 4" legs (eight 4" legs on Model CG59 ) to the body of the griddle by threading the exposed leg stud into the threaded holes located on the underside of the griddle. Tighten each leg so that the top face of the leg is pressed firmly against the body bottom.

LOCATION

Place the griddle in its operating location. Allow adequate space around the griddle for operation and servicing.

LEVELING

Level the griddle front-to-back and side-to-side. Hold the leg with one hand to prevent the leg from loosening from the body and use a wrench to turn the foot to increase or decrease leg height.

– 5 –