147.35 R TREADMILL
ASSEMBLY – PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK.
STEP 1: Assemble the Console Support Tube |
|
| |
When attaching the right upright (310) first attach the 8 pin data cable to the |
|
| |
wire in the upright. This will allow you to pull the data cable up through the | 306 | X8 | |
upright after installation. | |||
(1) Attach the Left (311) console support tube (wrapped in clear plastic) and |
|
| |
Right (310) console support tube (wrapped in green shaded plastic) to the |
|
| |
treadmill main frame with eight M8 x 15mm Allen Head Bolts (306) and eight | 313 | X8 | |
M8 Flat Washers (313) HAND TIGHTEN ONLY. | |||
|
| ||
(2) Slide the base frame covers over uprights Do not fasten until after you |
|
| |
complete STEP 3. |
|
|
Green plastic wrap
Clear plastic wrap
Bolts should be hand tight only