Meco 6212S00T91, 6512S0DT91 manual Step Crossbrace & Right Tube Brace Assembly

9

Step 5

Crossbrace & Right Tube Brace Assembly

A. Assemble one Crossbrace to the inside of the back legs as shown with the short flange of the Crossbrace to the top and facing inwards. Install 4) 1/4-20 x .39” bolts through the holes in the Crossbrace and into the threaded inserts in the inside face of the legs.

B. Install the Right Tube Brace between the right legs and fasten in place with a 1/4-20 x 1.1” bolt through the outside of each leg and into the ends of the Tube Brace.

1/4-20 x .39” Bolt

4 pcs

1/4-20 x 1.1” Bolt

2 pcs

B

Center Crossbrace

5/32-30 x .39” Bolt

2 pcs

4	- 1/4-20 x .39” Bolt	A
2	- 1/4-20 x 1.1” Bolt

Crossbrace

B

Right Tube Brace

A Tank Locking Plate

1/4-20 x .59” Thumbscrew

Step 6

Tank Locking Plate & Center Crossbrace Assembly

A. Orient the Tank Locking Plate as shown with the edge flanges facing outward and the edge notches to the bottom. Install two 1/4-20 x .59” Thumbscrews through the vertical slots in the Tank Locking Plate and into the Tank Side Brace.

B. Install the Center Brace between the front and back bottom Crossbraces. The Center Brace will be under the short flanges of the Crossbraces with the open side down. Fasten in place with two 5/32-30 x .39” bolts through the flanges of the Crossbraces.