12

Step 10

Main Burner Assembly

A. Slide the burner tubes down through the indicated holes in the bowl and align the holes in the burner brackets with the holes in the Bowl.

B. From underneath the Bowl, fasten the Main Burner to the Bowl with 2) #5 x .31” Tapping Screws.

#5 x .31” Tapping Screw

2 pcs.

1/4-20 x .39” Bolt with Fiber Washer 2 pcs

A

B

Step 10A (6512 ONLY)

Tank Heat Shield Attachment

Fasten the Tank Heat Shield to the bottom of the Bowl with two 1/2-20 x .39” bolts with fiber washers and two 1/4-20 nuts. The Bolts with fiber washers are installed inside the bowl with the nuts on the underside of the Tank Heat Shield.

1/4-20 Nut

2 pc

Tank Heat Shield

Page 12
Image 12
Meco 6512S0DT91, 6212S00T91 manual Step Main Burner Assembly, only Tank Heat Shield Attachment