Meco 6212S00T91, 6512S0DT91 manual Step Hood Handle Assembly, Step Hood/Hinge Assembly

17

Step 17

Hood Handle Assembly

Model 6212: Attach the Hood Handle to the Hood with 2) 1/4-20 x .39” Bolts and Fiber Washers. Place Heat Baffles between the Handle and the Hood, orienting baffles so they align with the end of the handle.

Model 6512: Attach the Hood Handle and the Hood Handle Heat Shield to the Hood with 2) 1/4-20 x .39” Bolts. The Heat Shield is placed inside the Hood with the raised areas around the holes against the hood. The bolts are in- serted through the Heat Shield then Hood and into the end of the Hood Handle. No Fiber Washers or Thermal Baffles.

1/4-20 x .39” Bolt

2 pc

Fiber Washer

2 pc (6212 only)

Thermal Baffle 2 pc (6212 only)

Model 6212 Model 6512

Thermal Baffle

Fiber Washer
	Hood Handle
1/4-20 x .39” Bolt	Heat Shield
1/4-20 x .39” Bolt	6512 Only

Step 18

Hood/Hinge Assembly

Place Hood on Bowl and align hinges. Hood hinge legs insert between Bowl hinge legs. Install Hood Hinge Axle through holes in hinge legs, inserting towards the center of the grill. Fasten in place by inserting Axle Pin through small hole in Axle. Repeat for other Hinge.

Hood Hinge Axle 2 pc

Axle Pin

2 pc