Meco 6212S00T91, 6512S0DT91 manual Contents, Preparation for Assembly

Contents
Preparation for Assembly		3
Parts Identification
Parts Illustration		4
Parts List	.....................................................................	5
Assembly Instructions
Step 1	Frame Identification	6
Step 2	Shroud to Leg Assembly	7
Step 3	Front Crossbrace Assembly	7
Step 4	Tank Side Brace & Top Crossbrace Assembly.	.8
Step 5	Crossbrace & Right Tube Brace Assembly	9
Step 6	Tank Locking Plate & Center Brace Assembly .9
Step 7	Wheel Assembly (Model 6212)	10
Step 7	Wheel Assembly (Model 6512)	10
Step 8	Bowl Support & Hinge Half Assembly	11
Step 9	Drip Cup Wire Assembly	11
Step 10	Main Burner Assembly	12
Step 10A	(6512 Only) Tank Heat Shield Attachment ...	12
Step 11	Bowl to Cart Assembly	13
Step 12	Manifold Assembly	13
Step 12C	(6512 Only) Control Panel Heat Shield	14
Step 13	Control Panel Assembly	14
Step 14A Main Burner Electrode Assembly		15
Step 14B	Electrode Wire Plug Assembly	15
Step 15	Side Table Assembly	16
Step 16	Hood Hinge Half Assembly	16
Step 17	Hood Handle Assembly	17
Step 18	Hood / Hinge Assembly	17
Step 19A	Flavor Activator Assembly	18
Step 19B	Warming Rack Assembly	18
Step 20A Cooking Grid Assembly		18
Step 20B Control Knob Assembly		18
Step 21	Tank Blocking Wire Assembly	19
Step 22	Drip Cup Assembly	20

3

Step 23 (6512 Only) Battery Installation	20
Connecting/Disconnecting the Gas
Using Gas	21
LP Gas Cylinder	21
LP Hose & Regulator	22
Connecting LP Gas Cylinder	22
Disconnecting LP Gas Cylinder	22
Before Using Your Grill
Installation Codes	23
Selecting a Location	23
Performing a Leak Test	23
How to Perform a Leak Test “First Time Use”	24
Lighting Grill Using the Ignitor	25
Check the Flame	25
Manually Lighting the Grill	27
Cooking on the Gas Grill
Grill Cooking (Direct Method)	28
Roasting (Indirect Method)	28
Warming Rack	30
End of Cooking Session	30
Care and Maintenance
Cleaning the Grill	30
How to Clean the Burners	31
Storage	32
Emergencies	33
Troubleshooting	33
Important Notice- LP Cylinder with OPD	35
Limited Warranty	36

Register your grill and retain your receipt.

Preparation for Assembly

Remove grill and all the packaging from carton and place on floor. Make sure there are no loose parts.

NOTE: Before using your grill, read the instructions and your manual.

For easier set-up and assembly, follow instructions of each step in the order they are written as you look at the dia- grams. If accessories mentioned in certain assembly steps do not come with your model, skip that step and proceed to the next step that applies to your model.

If you have any questions or need help, go to www.aussiegrills.com or contact Customer Service at 1-800-251- 7558. Be sure to have the grill model number and serial number printed on the black label located on the back of the cart shroud. If you need replacement parts, look in the Parts List Section to find the exact parts you need. If you need a replacement part under warranty, a proof of purchase will be necessary. You will be asked to forward your proof of purchase via e-mail to csr@aussiegrills.com or to fax your proof of purchase to 423-639-1055 and reference your model and serial number. It is important to register your grill and retain your receipt.