Hoist Fitness HD1700 owner manual 2-13UNC x 4 1/2 Hex Head Bolt WZ

OWNERS

M A N U A L

Step 2i

F R A M E A S S E M B L Y

Finish assembly by attaching (26) to both (1)’s. Then attach (CX) to

(1). Repeat assembly for (CY). Wrench Tighten bolts.

*IMPORTANT*

Now that the Hd1700 machine is completely assembled take time to assure that your unit is assembled square and perpendicular. To check this use a Level to check that the Guide Rods are perpendicular in both directions. If they are not perpendicular in both directions. It will be necessary to loosen some Frame hardware to re-align the Frame and re- tighten bolts.

Part Descriptions	Hardware Descriptions
1 - Weight Frame Upright	S - 1/2”-13UNC x 4 1/2” Hex Head Bolt (WZ)
26 - Shield	T - 1/4-20UNC x 5” Button Head Bolt (WZ)
	AA - 1/2” Washer
	AD - 1/4” Washer
	BA - 1/2” Nylok Nut
	BC - 1/4” Nylok Nut
	CW - White Spacer
	CX - HD1700 Placard (Left)
	CY - HD1700 Placard (Right)

Page - 21 HD1700 Assembly