TROUBLESHOOTING GUIDE
Problem
Sometimes the scooter doesn’t run, but other times it does
Charger gets warm during use
Scooter does not stop when applying the brake
Scooter makes loud noises or grinding sounds
Possible Cause
Brakes are not adjusted properly Loose wires or connectors
Motor or electrical switch damage
Normal response to charger use
Brakes are not adjusted properly Chain is too dry
Brake rotor is dragging on brake pads
Solution
Refer to adjusting the brakes instructions on page 4.
Check all wires around the motors and all connectors to make sure they are tight.
Contact your local Razor authorized service center for diagnosis and repair.
No action required. This is normal for some chargers and is no cause for concern. If your charger does not get warm during use, it does not mean that it is not working properly.
Refer to adjusting the brakes instructions on page 4.
Apply a lubricant such as 3 in 1 TM or
Use your fingers to twist the caliper adjuster in either direction until rotor is centered between pads
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com
or call
12
E_Series_Manualv10.indd 13 | 3/10/06 2:11:11 PM |