Razor E225S, E325S, E300s, E200s, E125 owner manual Replace the chain guard

Page 9

REPAIR AND MAINTENANCE

10Install the axle adjusters and axle nuts. Tighten until they just barely hold the hardware in place.

11Tighten both axle adjust- ers the same number of turns to ﬁne-tune the tension on the chain and to approximately maintain the centering of the wheel.

12Tighten the brake housing anchor securely. Test ride and check. Readjust as needed.

13Replace the chain guard.

E_Series_Manualv10.indd 9

3/10/06 2:11:07 PM

Image 9

Contents Do not Return to Store Safety Warnings ContentsEstimated Assembly and Set-Up Time Before YOU BeginRequired Tools Charging the Battery Assembly and SET-UPBattery that will no longer accept a charge Attaching the HandlebarsRepair and Maintenance Use the special valve Align the access hole Inﬂating the TiresExtender/adapter supplied Drive sprocket with Turning the wrenches counter Adjusting the ChainClockwise On the left side of the rear fork Wheel alignmentWith a 10mm wrench Chain and Rear Tire ReplacementReplace the chain guard Front Tire Replacement Replacement Parts Repair Centers Battery Care and DisposalCharger For a list of authorized Razor repair centersLoose wires or connectors Troubleshooting GuideCharger is not working EngageScooter makes loud noises or grinding sounds Charger gets warm during useE100 Parts ESeriesManualv10.indd 10/06 21112 PM E200 Parts ESeriesManualv10.indd 10/06 21113 PM E300 Parts E300 Parts SB 1918 California Declaration ESeriesManualv10.indd 10/06 21114 PM Warranty Safety RemindersBrake Safety Gear Loose Parts Tire Inﬂation

Related manuals

Manual 13 pages 36.33 Kb

Manual 11 pages 39.63 Kb