Controller Layout Playing Games | Excalibur electronic VR101-CC

Controller Layout

Playing Games

	Joystick
Directional Pad	Turbo
(D-pad)	Buttons

B button

Reset

A button

Start

Start Up

With the batteries properly installed and the IR and converter units connected you are ready to begin playing with your 101-In-1 Action Games Plug and Play. Make sure that the Off/On switch on the battery housing is set to the ON position. Each player should turn their individual controller on. You will see the system’s title screen come on for a moment. You can skip this screen by pressing the start button on controller 1 (Black). You will then be taken to the game selection screen.

NAVIGATING

THE GAME

SELECTION SCREEN

With either the controller’s D-Pad or Joystick you may scroll up and down the list of games. You can also use left and right to skip between the several pages of games. Once you have found the game that you’d like to play, press start. Within seconds the game’s start-up screen will appear.

Note: Only Player 1 (Black controller) can select games.

Reset
You can reset the system at any time with the reset button.
Turbo Buttons	A or B
These buttons act as the equivalent of pressing either the	A or B
button rapidly.
Note: Each individual game uses the buttons and controls differently.
See instructions for each game for the function of buttons.

When the controllers are on you will see a light flash from the center (just about the reset/start buttons). This indicates that the controllers are powered and working.